There is a difference between ceramic heaters and other types of heaters

The most unique thing about infrared space heaters is that they don't use convection and don't simply blow hot air. Instead, this heater emits radiation in the form of waves. One huge benefit to this is that the heat from the radiation isn't dependent on the air in the room and in front of the unit itself to traverse the distance to your shivering self.

There is a difference between ceramic heaters and other types of heaters; this is because ceramic heaters heat up the environment more easily. Unlike coil heaters, they do not use fire and have no risks of burning. On the other hand, coil heaters work by an electric current which heats them to such a high temperature that they burn.

Ceramic heaters are so called because they have a number of ceramic plates attached to some coils of metal that heat up in the same way as a coil heater, but the plates absorb the heat and release it into the air. They are quicker than coil heaters and they take less time to cool down once they are switched off.

Ceramic heaters do not waste a lot of energy and they can also reduce your electricity bill if you have them installed at home. The heating process would be faster if the heater has more ceramic plates in it. These heaters are used to heat all rooms due to their high efficiency.

As the name implies, ceramic convection heaters operate using convection. This means that much like with a quartz heater with its tube, the ceramic unit uses the electricity to heat up a ceramic core at its center. Then a fan that is also powered by the electricity uses convection heating to blow heated air from the vicinity of the core out and into the room.

In direct opposition to the infrared heater, the fact that the heat does travel on the air currents means that this unit won't target just you, but will heat up your entire room. If you're in a space where you'll be moving positions often or in a larger room with multiple people, a convection ceramic heater is the better way to make sure everyone stays warm.

ceramic heater

What are convection heater may have an electrical heater element

The convection heater is a heater which operates by air convection currents circulating through the body of the appliance, and across its heating element. This heats up the air, causing it to increase in volume and so become buoyant and rise. Oil heaters are an example of this kind of heating appliance. A convection heater may have an electrical heater element, a hot water coil, or a steam coil. Because of the natural ventilation, they are quieter in operation than fan heaters.

The convector heater as illustrated in is an example of an early model convection space heater, by the convector heater. Theconvector heater was considered to be highly efficient radiant type of gas heater at the time. The heater utilizes radiant heat, and, by virtue of draft construction, supplements its power by drawing cold air through the facing, heating it and forcing it into the room through the register. This not only forces the circulation that provides an even warmth in every section of the room, but enables the heater to operate at all times with a perfectly cool exterior. Positive circulation provides an even warmth throughout the room, and guarantees a clean, humid, healthful[citation needed] air to occupants.

The mixing chamber, due to its exclusive construction, utilizes centrifugal force to insure a perfect mixture between the gas and air, which in turn provides complete combustion, thus preventing dangerous fumes. After the gas leaves the mixing chamber it passes into a distribution chamber whose shape is such that an equal amount of gas passes into each jet, giving uniform flame height and also intensity.

Due to the rising warm air from convector heaters, warm air may accumulate at the ceiling of the room. Therefore, convector heaters are often paired with ceiling fans, especially in rooms with tall ceilings. In the winter, setting a fan to turn clockwise will allow for more air circulation and will keep heat from rising completely, making the room feel warmer and allowing one to turn down the thermostat.

convector heater

PTC ceramic material is semi-conductive and when voltage is applied to it

A ceramic heater as a consumer product is a space heater that generates heat using a heating element of ceramic heater.

Ceramic heaters are usually portable and typically used for heating a room or small office, and are similar to metal-element fan heaters.

PTC ceramic material is semi-conductive and when voltage is applied to it, the power decreases quickly as it reaches a certain temperature according to the particular composition of the ceramic. This means its temperature is self-regulating.

The ceramic elements are in contact with aluminium fins, thereby heating the fins up. A fan blowing across the fins heats the air.

Electric heating elements clarification needed made of resistance wire also have a positive temperature coefficient of resistivity, but do not increase their resistance enough to be self-regulating; they are typically used with the wires red-hot. The ceramic, on the other hand, increases its resistance sharply at the Curie temperatures of the crystalline components, typically 120 degrees Celsius, and remains below 200 degrees Celsius, providing a significant according to safety advantage.

ceramic heater

Fan heaters can be less expensive to buy than other heaters due to simple construction

A fan heater is a heater that works by using a fan to pass air over a heat source. This heats up the air, which then leaves the heater, warming up the surrounding room. They can heat an enclosed space such as a room faster than a heater without fan, but, like any fan, create audible noise.

Fan heaters for marine and offshore installations are designed to meet marine requirements. The fan heaters comes in a portable version and wall mounted version. They are applicable for use on ships and offshore installations and are designed to make very low noise.

Electric fan heaters can be less expensive to buy than other heaters due to simple construction. The fan carries heat away from the device, which can be made smaller without overheating. The relatively small amount of electricity used to operate the fan is partly converted to additional heat, so that efficiency is not a problem. All heaters without external ventilation are nearly 100% efficient, meaning that almost all energy input goes into the room as heat. However, if the efficiency of generating the electricity is taken into account, the overall efficiency decreases significantly.

Electric fan heaters are more expensive to run than fuel powered heaters due to the cost of electricity. This makes them best suited to occasional use rather than as regularly used heat sources.

Externally vented non-electrical (combustion powered) fan heaters lose some heat to the outdoors, and are thus less efficient. These are used where it is necessary not to release the fumes of combustion into the heated area.

Fan heaters use high-output finned heating elements in front of a fan to provide a larger airflow and higher kilowatt rating than many smaller residential fan heaters. Industrial fan heaters can be used in warehouses, shipping containers, clean rooms, shops and other general purpose heating applications. They can also be used as dryers or dehumidifiers with modified attachments or mountings.

fan heater with coil heating element

The fan heater is an ideal device for you to have in your house

While winter has its own charm, it does pose a few problems for most people who are not accustomed to the low temperatures. The nights, in particular, are hard to get through if you are not all warm and cozy. You can invest in all the warm clothing and quilts you want but nothing beats the comfort of a warm room. For that purpose, you should get a heater for your home, office or anywhere you want.

A fan heater is an ideal device for you to have in your house. Compact and lightweight, the fan heater can be carried around and placed anywhere in the room. Not only that, it is cheaper than the normal heaters and more energy efficient as well; meaning that you do not have to worry about the electricity bill as you turn up the heat in the winters.

Electric fan heaters can be less expensive to buy than other heaters due to simple construction. The fan carries heat away from the device, which can be made smaller without overheating. The relatively small amount of electricity used to operate the fan is partly converted to additional heat, so that efficiency is not a problem. All heaters without external ventilation are nearly 100% efficient, meaning that almost all energy input goes into the room as heat. However, if the efficiency of generating the electricity is taken into account, the overall efficiency decreases significantly.

Electric fan heaters are more expensive to run than fuel powered heaters due to the cost of electricity. This makes them best suited to occasional use rather than as regularly used heat sources.

Externally vented non-electrical (combustion powered) fan heaters lose some heat to the outdoors, and are thus less efficient. These are used where it is necessary not to release the fumes of combustion into the heated area.

Industrial fan heaters use high-output finned heating elements in front of a fan to provide a larger airflow and higher kilowatt rating than many smaller residential fan heaters. Industrial fan heaters can be used in warehouses, shipping containers, clean rooms, shops and other general purpose heating applications. They can also be used as dryers or dehumidifiers with modified attachments or mountings. Portable industrial fan heaters tend to range from around 1.5 kW up to about 45 kW with either axial or centrifugal fans and various staged controls and over-temperature safety limit controls.

wall mounted fan heater

Ceramic heater technology provides solutions for infrared heating elements

Ceramic heater are efficient, robust heaters which provide long wave infrared radiation. The ceramic heaters and infrared heaters are used in a diverse range of industrial and engineering applications such as thermoforming heaters, packaging and as heaters for paint curing, printing and drying. They are also used very effectively in infrared outdoor heaters and infrared saunas. Ceramic elements produced by ceramic heater trough elements, ceramic hollow elements, ceramic flat elements, and ceramic infrared bulbs

Ceramic heater technology provides solutions for infrared heating elements in the UK and distribute to many countries around the world including ceramic elements, heaters, infrared heating elements.

Ceramic heaters includes models with thermostat control, oscillation, timer, and remote control. Check out the stylish designer series, whose decorative features blend in with home, or the versatile compact series, which includes the small yet powerful. Ceramic heaters convenient space heaters fit where you need them and warm your space quickly, every time.

Ceramic heater as a consumer product is a space heater that generates heat using a heating element of PTC (Positive Temperature Coeffient) ceramic.

Ceramic heaters are usually portable and typically used for heating a room or small office, and are similar to metal-element fan heaters.

ceramic heater

PTC ceramic heater is semi-conductive and?

Small ceramic heater are the inexpensive yet energy efficient space heaters that you should consider for your home. With hard wearing and durable ceramic heating elements, these heaters produce comfortable and warming heat for your room as well as being safe to use.

If you don’t yet know enough about small ceramic heater to make an informed decision about which one will be best for your needs, you should read this useful buying guide to find out plenty of helpful information. You should also check out these great ceramic heater reviews.

If you consider all the possibilities and all the requirements that you have for your small ceramic heater, you are sure to be able to find the best ceramic heater for your home. Thankfully, these heaters are available in a wide price range so it does not matter what your budget is as you’re sure to find something you can afford.

PTC ceramic heater is semi-conductive and when voltage is applied to it, the power decreases quickly as it reaches a certain temperature according to the particular composition of the ceramic. This means its temperature is self-regulating.

The ceramic elements are in contact with aluminium fins, thereby heating the fins up. A fan blowing across the fins heats the air.

small ceramic heater clarification needed made of resistance wire also have a positive temperature coefficient of resistivity, but do not increase their resistance enough to be self-regulating; they are typically used with the wires red-hot. The ceramic, on the other hand, increases its resistance sharply at the Curie temperatures of the crystalline components, typically 120 degrees Celsius, and remains below 200 degrees Celsius, providing a significant according to whom?safety advantage.

small ceramic heater

The convector heater considered to be highly efficient radiant type of gas heater at the time

A convection heater is a heater which operates by air convection currents circulating through the body of the appliance, and across its heating element. This heats up the air, causing it to increase in volume and so become buoyant and rise. Oil heaters are an example of this kind of heating appliance. A convection heater may have an electrical heater element, a hot water coil, or a steam coil. Because of the natural ventilation, they are quieter in operation than fan heaters.

The convector heater considered to be highly efficient radiant type of gas heater at the time. The heater utilizes radiant heat, and, by virtue of draft construction, supplements its power by drawing cold air through the facing, heating it and forcing it into the room through the register. This not only forces the circulation that provides an even warmth in every section of the room, but enables the heater to operate at all times with a perfectly cool exterior. Positive circulation provides an even warmth throughout the room, and guarantees a clean, humid, healthful[citation needed] air to occupants.

The mixing chamber, due to its exclusive construction, utilizes centrifugal force to insure a perfect mixture between the gas and air, which in turn provides complete combustion, thus preventing dangerous fumes. After the gas leaves the mixing chamber it passes into a distribution chamber whose shape is such that an equal amount of gas passes into each jet, giving uniform flame height and also intensity.

Due to the rising warm air from convector heaters, warm air may accumulate at the ceiling of the room. Therefore, convector heaters are often paired with ceiling fans, especially in rooms with tall ceilings. In the winter, setting a fan to turn clockwise will allow for more air circulation and will keep heat from rising completely, making the room feel warmer and allowing one to turn down the thermostat.

Convection heaters may also incorporate thermal mass. Examples include hot water radiators, nightstore or oil column heaters, underfloor heaters and solar hydronic heaters. Heaters with high thermal storage generally don’t get as hot on the surface as heaters with low thermal storage, and therefore have steadier heat output.

convector heater

Use Electric heaters are revered for their relative ease of use ability to be placed almost anywhere

We reveal the best wall hanging electric heaters that you can rely on to heat quickly and efficiently. Our test lab reviews include electric heaters - discover which we recommend as Best Buys.

We don't recommend buying a whole bank of wall hanging electric heaters to keep warm in winter, but there's no doubt that the occasional use of a good one can be a quick, easy way to take the edge off a cold night, particularly if you're sitting reasonably close to the heater and the room isn't too large.

If you have a big space to heat, you may want to try a wall hanging electric heaters or a reverse-cycle split-system air conditioner. However, if you have a small, enclosed space like a bathroom or bedroom, an electric heater will do the job – particularly one with a fan.

It's often claimed that this type or that type is more effective, or more efficient. CHOICE tests have found that the type of heater isn't necessarily a factor; as with all appliances, it's the overall design and quality that makes for a wall hanging electric heaters. Let's take a look at the different types available.

Wall hanging electric heaters Designs vary as well, from basic box units to decorative fireplaces made to simulate the full fireplace experience without the mess, there is a huge variety from which to choose.
Electric heaters are revered for their relative ease of use, ability to be placed almost anywhere and the convenience over gas powered heat. Electric heat is by far the most popular and used form of portable heating in use today.

wall hanging electric heaters

The powerful flat fan heater is a hard working horizontal heater with a choice of three settings

In practical two flat fan heater comes with heats and a cool fan setting, an aluminium diecast grill and an adjustable tilt base so you can direct the heat flow where you want it. With an adjustable thermostat, safety cutout and overheat protection it gives you peace of mind. Its easily accessed carry handle makes for maximum portability and its low profile makes it perfect for positioning under desks.

The powerful flat fan heater is a hard working horizontal heater with a choice of three settings. It has a contemporary curved design and offers stylish practicality in the home or office.

The flat fan heater offers a cool air facility for summer use and features a thermostat to control the temperature and save on running costs.

It has a in-built frost protection ensuring it avoids the temperature falling below 5°C while the overheat safety cut-out stops the heater if it is accidentally covered.

Heat up those rooms that the radiators don't get to with this excellent budget fan heater. The unobtrusive mains powered heater has a low profile and features two different heat settings as well as a cool air setting, ideal for adjusting to the current temperature in the room. The adjustable thermostat lets you set your desired temperature and has a overheat safety cut off.

Flat fan heater have stocked only the finest choice of electric fan heaters. Whether our customers are installing the heaters into bathrooms or as a portable heater for conservatories or bedrooms, we have satisfied thousands of customers and kept their property warm throughout the winter months. Our fan heater range includes.

flat fan heater

What is electric wall mounted fan heater

A electric wall mounted fan heater is a heater that works by using a fan to pass air over a heat source. This heats up the air, which then leaves the heater, warming up the surrounding room. They can heat an enclosed space such as a room faster than a heater without fan, but, like any fan, create audible noise.

Electric wall mounted fan heater can be less expensive to buy than other heaters due to simple construction. The fan carries heat away from the device, which can be made smaller without overheating. The relatively small amount of electricity used to operate the fan is partly converted to additional heat, so that efficiency is not a problem. All heaters without external ventilation are nearly 100% efficient, meaning that almost all energy input goes into the room as heat. However, if the efficiency of generating the electricity is taken into account, the overall efficiency decreases significantly.

Electric fan heaters are more expensive to run than fuel powered heaters due to the cost of electricity. This makes them best suited to occasional use rather than as regularly used heat sources.

Externally vented non-electrical (combustion powered) fan heaters lose some heat to the outdoors, and are thus less efficient. These are used where it is necessary not to release the fumes of combustion into the heated area.

Electric fan heaters are unsealed appliances with live electric parts inside, so they are not safe to use in wet environments due to risk of electrocution due to the potential of moisture providing conductive paths to electrically live parts. Electric fan heaters usually have a thermal fuse close to the heating element(s) to protect against overheating due to fan failure, and a tip-over switch to shut it off when the fan outlet is not in the desired as-designed orientation. Metal-cased heaters perform better in potential fire-causing faults than plastic-cased ones, since the case will stay intact and is not flammable, but they present a higher risk of electrocution during heater malfunctions.

Electric wall mounted fan heater release all the fumes of combustion into the room, creating a risk of poisoning by carbon monoxide and carbon dioxide. Most installed fuel fan heaters in the first world use a heat exchanger and external ventilation, avoiding this risk, and dumping the combustion gases outdoors.

The bimetal cutout operates if the device overheats because the intake is blocked or the fan fails, and resets once the heater cools after the obstruction is removed. The thermal fuse is a failsafe backup device that will disconnect the heating element permanently in case of extreme overheating causing risk of fire, usually because the bimetal switch fails to operate.

electric wall mounted fan heater

This little heater heats up my legs and feet a small ceramic heater

When chilly temperatures set in, space heaters can supplement the heat in your home, garage or other living spaces. Ace Hardware carries infrared, convection, ceramic heaters and more to suit your comfort level and location requirements.

With so many types of heaters to choose from, it helps to understand some high level advantages and differences. While many people select heaters for reasons of convenience and relatively low operating costs, it’s important to understand how different types of electric heaters warm the air.

Infrared heaters, for example, tend to just provide directional heat, heating only the part of the room in the direction they are facing. Ceramic heaters, on the other hand, provide more uniform heat distribution for all-over room comfort.

A Ceramic Heater is an electric consumer product that produces heat by passing room-temperature air over a ceramic heating element (PTC or Positive Temperature Coefficient.)

As electrical current is applied to the ceramic element the voltage quickly decreases as it obtains a particular temperature which is based on the composition of the ceramic element. This in effect means that a ceramic heater is self-regulating and is generally more energy efficient compared to a typical resistance space heater.

I use this heater in the office since the thermostat stays on one temperature and since its a large office building it gets colder in some offices at different times during the day. Actually, we all have one of these in each of our offices. Anyway, its a little heater but it does the trick. Typically if I'm going to be cold, it'll be at the lower parts of body. This little heater heats up my legs and feet. It's not a silent heater, at times it seems relatively loud if you're near it but someone across the hall won't hear the heater but it'll be difficult at times to hear them when they're speaking to you if they are at their desk in their office. It probably didn't cost very much considering they put one in each of our offices so I would conclude that it was a good buy.

small ceramic heater

Why use wall mounted ceramic heater electric

There is a difference between Wall mounted ceramic heater electric and other types of heaters; this is because ceramic heaters heat up the environment more easily. Unlike coil heaters, they do not use fire and have no risks of burning. On the other hand, coil heaters work by an electric current which heats them to such a high temperature that they burn.

Wall mounted ceramic heater electric are the inexpensive yet energy efficient space heaters that you should consider for your home. With hard wearing and durable ceramic heating elements, these heaters produce comfortable and warming heat for your room as well as being safe to use.

If you don’t yet know enough about wall mounted ceramic heater electric to make an informed decision about which one will be best for your needs, you should read this useful buying guide to find out plenty of helpful information.

PTC ceramic material is semi-conductive and when voltage is applied to it, the power decreases quickly as it reaches a certain temperature according to the particular composition of the ceramic. This means its temperature is self-regulating.

The ceramic elements are in contact with aluminium fins, thereby heating the fins up. A fan blowing across the fins heats the air.

wall mounted ceramic heater electric made of resistance wire also have a positive temperature coefficient of resistivity, but do not increase their resistance enough to be self-regulating; they are typically used with the wires red-hot. The ceramic, on the other hand, increases its resistance sharply at the Curie temperatures of the crystalline components, typically 120 degrees Celsius, and remains below 200 degrees Celsius, providing a significant[according to whom?safety advantage.

Fans and thermostats inside the heater prevent it from overheating. The fans blow the hot air out of the heater into the room, and they also cool down the ceramic plates. They keep on working even when the heater is off. These heaters also have a tilt detection unit at the bottom, allowing the heater to shut off and switch on, which is another safety feature.

wall mounted ceramic heater electric

Electric radiant heating uses heating elements that reach a high temperature

We reveal the best electric heaters that you can rely on to heat quickly and efficiently. Our test lab reviews include electric heater with timer which we recommend as Best Buys.

Electric heating is a process in which electrical energy is converted to heat. Common applications include space heating, cooking, water heating and industrial processes. An electric heater is an electrical device that converts electric current to heat.[1] The heating element inside every electric heater is an electrical resistor, and works on the principle of Joule heating: an electric current passing through a resistor will convert that electrical energy into heat energy. Most modern electric heating devices use nichrome wire as the active element; the heating element, depicted on the right, uses nichrome wire supported by ceramic insulators.

Alternatively, a heat pump uses an electric motor to drive a refrigeration cycle, that draws heat energy from a source such as the ground or outside air and directs that heat into the space to be warmed. Some systems can be reversed so that the interior space is cooled and the warm air is discharged outside or into the ground.

Space heating is used to warm the interiors of buildings. Space heaters are useful in places where air-handling is difficult, such as in laboratories. Several methods of electric space heating are used.

Electric radiant heating uses heating elements that reach a high temperature. The element is usually packaged inside a glass envelope resembling a light bulb and with a reflector to direct the energy output away from the body of the heater. The element emits infrared radiation that travels through air or space until it hits an absorbing surface, where it is partially converted to heat and partially reflected. This heat directly warms people and objects in the room, rather than warming the air. This style of heater is particularly useful in areas through which unheated air flows. They are also ideal for basements and garages where spot heating is desired. More generally, they are an excellent choice for task-specific heating.

Radiant heaters operate silently and present the greatest potential danger of ignition of nearby furnishings due to the focused intensity of their output and lack of overheat protection. In the United Kingdom, these appliances are sometimes called electric fires, because they were originally used to replace open fires.

The active medium of the heater depicted at the right is a coil of nichrome resistance wire inside a fused silica tube, open to the atmosphere at the ends, although models exist where the fused silica is sealed at the ends and the resistance alloy is not nichrome.

Advantages of electric heating methods over other forms include precision control of temperature and distribution of heat energy, combustion not used to develop heat, and the ability to attain temperatures not readily achievable with chemical combustion. Electric heat can be accurately applied at the precise point needed in a process, at high concentration of power per unit area or volume. Electric heating devices can be built in any required size and can be located anywhere within a plant. Electric heating processes are generally clean, quiet, and do not emit much byproduct heat to the surroundings. Electrical heating equipment has a high speed of response, lending it to rapid-cycling mass-production equipment.

electric heater with timer

Home Glass heater controls cycle using a mechanical or electronic thermostat?

A Glass heater is a space heater used to heat a room or outdoor area by burning natural gas, liquefied petroleum gas, propane or butane.

Indoor household gas heaters can be broadly categorized in one of two ways: flued or non-flued, or vented and unvented.

The first Glass heater made use of the same principles of the Bunsen burner invented in the previous year. It was first commercialized by the English company Pettit and Glass heater in 1856. The flame heats the air locally. This heated air then spreads by convection, thus heating the whole room. Today the same principle applies with outdoor patio heaters or "mushroom heaters" which act as giant Bunsen burners.

Beginning in 1881 the burner's flame was used to Glass heater a structure made of asbestos, a design patented by Sigismund Leoni, a British engineer. Later, fire clay replaced the asbestos because it is easier to mould. Modern gas heaters still work this way although using other refractory material.

Modern Glass heater have been further developed to include units which utilize radiant heat technology, rather than the principles of the Bunsen burner. This form of technology does not spread via convection, but rather, is absorbed by people and objects in its path. This form of heating is particularly useful for outdoor heating, where it is more economical than heating air that is free to move away.

Flued heaters would always be permanently installed. The flue, if properly installed with correct overall height, should extract most heater emissions. A correctly operating flued gas heater is usually safe.

Non-flued heaters – also known as unvented heaters, ventfree heaters or flueless fires may be either permanently installed or portable, and sometimes incorporate a catalytic converter. Non-flued heaters can be risky if appropriate safety procedures are not followed. There must be adequate ventilation, they must be kept clean, and they should always be switched off before sleeping. If operating correctly the main emissions of a non-flued gas heater are water vapour and carbon dioxide and nitrogen dioxide.

Home Glass heater controls cycle using a mechanical or electronic thermostat. Gas flow is actuated with a valve. Ignition is by electric filament or pilot light. Flames heat a radiator in the air duct but outside the flue, convection or a fan may distribute the heat.

Glass heater

fan heaters are more expensive to run than fuel powered heaters due to the cost of electricity

A fan heater is a heater that works by using a fan to pass air over a heat source. This heats up the air, which then leaves the heater, warming up the surrounding room. They can heat an enclosed space such as a room faster than a heater without fan, but, like any fan, create audible noise.

Electric fan heaters can be less expensive to buy than other heaters due to simple construction. The fan carries heat away from the device, which can be made smaller without overheating. The relatively small amount of electricity used to operate the fan is partly converted to additional heat, so that efficiency is not a problem. All heaters without external ventilation are nearly 100% efficient, meaning that almost all energy input goes into the room as heat. However, if the efficiency of generating the electricity is taken into account, the overall efficiency decreases significantly.

Electric fan heaters are more expensive to run than fuel powered heaters due to the cost of electricity. This makes them best suited to occasional use rather than as regularly used heat sources.

Externally vented non-electrical (combustion powered) fan heaters lose some heat to the outdoors, and are thus less efficient. These are used where it is necessary not to release the fumes of combustion into the heated area.

Electric fan heaters are unsealed appliances with live electric parts inside, so they are not safe to use in wet environments due to risk of electrocution due to the potential of moisture providing conductive paths to electrically live parts. Electric fan heaters usually have a thermal fuse close to the heating element(s) to protect against overheating due to fan failure, and a tip-over switch to shut it off when the fan outlet is not in the desired as-designed orientation. Metal-cased heaters perform better in potential fire-causing faults than plastic-cased ones, since the case will stay intact and is not flammable, but they present a higher risk of electrocution during heater malfunctions.

Portable fuel-powered fan heaters release all the fumes of combustion into the room, creating a risk of poisoning by carbon monoxide and carbon dioxide. Most installed fuel fan heaters in the first world use a heat exchanger and external ventilation, avoiding this risk, and dumping the combustion gases outdoors.

The next picture shows the two overheat cutouts. The bimetal cutout operates if the device overheats because the intake is blocked or the fan fails, and resets once the heater cools after the obstruction is removed. The thermal fuse is a failsafe backup device that will disconnect the heating element permanently in case of extreme overheating causing risk of fire, usually because the bimetal switch fails to operate.

Industrial fan heaters use high-output finned heating elements in front of a fan to provide a larger airflow and higher kilowatt rating than many smaller residential fan heaters. Industrial fan heaters can be used in warehouses, shipping containers, clean rooms, shops and other general purpose heating applications. They can also be used as dryers or dehumidifiers with modified attachments or mountings. Portable industrial fan heaters tend to range from around 1.5 kW up to about 45 kW with either axial or centrifugal fans and various staged controls and over-temperature safety limit controls.

fan heater

The convector heater considered to be highly efficient radiant type of gas heater at the time

A convection heater is a heater which operates by air convection currents circulating through the body of the appliance, and across its heating element. This heats up the air, causing it to increase in volume and so become buoyant and rise. Oil heaters are an example of this kind of heating appliance. A convection heater may have an electrical heater element, a hot water coil, or a steam coil. Because of the natural ventilation, they are quieter in operation than fan heaters.

The convector heater considered to be highly efficient radiant type of gas heater at the time. The heater utilizes radiant heat, and, by virtue of draft construction, supplements its power by drawing cold air through the facing, heating it and forcing it into the room through the register. This not only forces the circulation that provides an even warmth in every section of the room, but enables the heater to operate at all times with a perfectly cool exterior. Positive circulation provides an even warmth throughout the room, and guarantees a clean, humid, healthful[citation needed] air to occupants.

The convector heater due to its exclusive construction, utilizes centrifugal force to insure a perfect mixture between the gas and air, which in turn provides complete combustion, thus preventing dangerous fumes. After the gas leaves the mixing chamber it passes into a distribution chamber whose shape is such that an equal amount of gas passes into each jet, giving uniform flame height and also intensity.

Due to the rising warm air from convector heaters, warm air may accumulate at the ceiling of the room. Therefore, convector heaters are often paired with ceiling fans, especially in rooms with tall ceilings. In the winter, setting a fan to turn clockwise will allow for more air circulation and will keep heat from rising completely, making the room feel warmer and allowing one to turn down the thermostat.

One of the most important things to know about radiant heaters is that they transfer heat to the objects around them instead of heating the air. So the heat goes directly to you (and the furniture, and anything else in the path of the radiant heater) instead of the air inside the room. Because of that, radiant heaters are best for slowly.

If you're wanting to stay toasty this winter we have a vast selection of radiators and electric heaters to keep those toes warm and faces smiling. Our collection contains a variety of well-known brands such as convector heater so that you've got plenty to choose from.

As well as a variety of brands, we also have the option of both convector heater and oil filled radiators to allow you to pick which type suits you best. To get really cosy, take a look at our range of fireplaces to get that proper winter feeling but don't forget to look through our fire guards section to make sure you're also safe.

convector heater